6-fold switched Power Sequencer safety socket Type F

Expert Power Sequencer 8112 for more operational safety by sequential switching in 19-inch installations
  • Demonstrably fewer and shorter outages of your critical IT and AV infrastructure
  • Increased operational safety by avoiding excessive inrush currents, e.g. in amplifiers, media technology installations and LED walls
  • Increased energy efficiency (Green IT and AV): Reduction of electricity costs and CO2 emissions
  • Effectively troubleshoot inrush problems: Typical popping noises when switching on critical devices such as audio amplifiers and loudspeakers no longer occur
Massive time and cost savings through plug-and-play drivers from our technology partners
  • q sys logo gude systems

8112-4: 6x safety socket type F (DE) with OVP and mains filter

Key Features
  • Sequential switching of up to 6 devices by simply pressing a button
  • Switching interval can be configured individually
  • Avoid critical inrush currents
  • Effectively reduce electricity costs
  • Integrated overvoltage protection type 3
  • Minimize noise through mains filter
  • Simple and quick mounting due to integrated mounting brackets
Switching functions
  • 6 power ports switchable via switch on the device or by external button
  • Sequential switching on and off of connected loads with a delay of 3 seconds between adjacent outputs

Go to product brief

Security
  • Current peaks during simultaneous switching operations (high inrush) and triggering of upstream fuses are prevented
  • Integrated type 3 overvoltage protection (according to EN61643-1) prevents damage to the device and connected loads
  • Integrated mains filter prevents interference currents and thus eliminates loss of signal quality in connected devices such as loudspeakers, amplifiers and beamers
Operation
  • Switching intervals (ON/OFF) can be set individually for each power port
  • Jack plug connector allows connection of external switch or I/O contacts for remote control of the switching routine
  • Low energy consumption
Buy product

Description

The Expert Power Sequencer 8112 is a power strip that has 6 power ports on the front. The connected loads can be switched on or off sequentially, making the PDU a must-have in AV installations with amplifiers, speakers and beamers.

Other features? Click here for our PDU selection

The connected loads can be switched on sequentially and switched off in reverse order by an automatic switching routine. The switching sequence is triggered by switching the on-button at the front of the device. The power ports are then switched on one after the other with a delay of 3 seconds each. This delay-interval can be adjusted individually for each power port.

The integrated overvoltage protection type 3 of the Expert Power Sequencer 8112-2 and 8112-4 effectively prevents defects of the device and the connected loads. In addition. the mains filter on both devices ensures that intereference noise from speakers or audio amplifiers is prevented.

 

Get in touch.