Our IP power solutions - Select the appropriate category
Our Monitoring Systems - Select the appropriate category
Our Radio Time Systems - Select the appropriate category
Choose the right accessories for our solutions
Choose your IT industry
Choose your AV area
Choose your industry
No IT without safety measures
Increased safety through out-of-band
Everything you need to know about energy monitoring
This is why energy efficiency in IT is so important
What professional environmental monitoring is all about
The right capacity planning is crucial
Flexible control through remote access
Support with basic questions
Support for our Power Distribution Units
Support for our Monitoring Systems
Support for our Time Systems
Find a distributor near you
Benefit from GUDE partner status
Report your project
Read our in-depth white papers
Get to know GUDE
Meet our satisfied customers
Reach your goal faster with our well-known technology partners
All news about GUDE
Download the latest firmware in our download area below. Then open the web browser of the device in which you want to update the firmware. Go to the “Maintenance” tab and click on “Choose File”. Select your downloaded firmware and click on “Upload”.
Important: All settings remain the same as before the firmware update. With our reliable PDUs, no power port is switched.
Our self-developed and high-quality software uses the following protocols: REST API, JSON, http/https, SNMP, Modbus TCP, Telnet and MQTT. You can find an overview here.
With the following Wikipedia texts you can control our PDUs and query our measured values via http/JSON:
– Control commands
– Measured values
For control and query of measured values using the other protocols (command line, Modbus TCP and Telnet) please look into the manual of the respective GUDE product. For MIB tables please refer to our download area of the respective GUDE product.
Our switched & metered PDUs and our pure metered IP power strips (metered PDUs) can measure up to 9 electrical measurands:
For some PDUs (Expert Power Control 8021, 8031, 8041, 8025, 8035, 8034, 8311-15/16) we can also measure a fault/differential current.
We use High Inrush relays in all switched PDUs.
Yes, the communication of our devices can be encrypted with HTTPS or SSH.
Our switchable IP power strips have a switch-on sequence of 1 second by default. This is a safety feature to prevent the fuse from blowing after a power failure.
To set the power-on sequence of our switched PDUs individually for your installation, go to “Configuration”. There you can set your desired switch-on delay per power port under “Initialization delay”.
All plug & play drivers can be found on our website with technology partners.
Mondays to thursdays
You can find many helpful tips, FAQs and technical information about our products in our Wiki. Here you will get help if you need special information about our products, e.g. how to query our network products via HTTPS commands or what to do if you forgot the device password.