8316-1: 8x safety socket type F             8316-2: 8x IEC C13

Key Features

• Event and schedule controlled switching
• Precise current metering per power outlet of up to 9 units and residual current
• 2 connectors for plug-and-play sensors
• Simple and quick mounting due to integrated mounting straps
• NTP function can be activated

Switching function

• Each power port can be switched via HTTP(S), SNMP, ModbusTCP or command line interface via Telnet, SSH, MQTT and serial interface
• Programmable on/off sequences for remote reboots (Remote Reboot)
• Power ports can be switched when preset sensor thresholds are exceeded
• Self-healing function thanks to 8-channel watchdog: Each power port can be assigned its own Watchdog (ICMP/TCP), which initiates an automatic restart if necessary
• Switching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure
• Current peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second

Go to demo webserver      Go to product brief

Metering function

• Power consumption metering (kwH) per power outlet with 2 energy counters: one counter counts consistently, the other counter is resettable
• Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr) per power outlet
• 2 connectors for combined plug-and-play sensors (temperature, humidity and air pressure) to prevent often occurring physical hazards like overheating and increased humidity or air pressure

Security

• Long-life High-Inrush Relays prevent welding of relay contacts during inrush current peaks
• Generation of status messages and alarms (e-mail, syslog, SNMP traps MQTT, SSH, Telnet)
• Encrypted e-mails (SSL, STARTTLS)
• Access protection by IP access control
• Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
• Password protected access
• Beeper for audible alarm when sensor limits are exceeded/deceeded

Operation

• Easy-to-read LED display for displaying total current, IP address and sensor values
• Firmware update via Ethernet during operation (no restart required)
• Simple and flexible configuration via web browser, Windows or Linux program
• Dynamic assignment of an IP address via DHCP or manual assignment of static IP address
• Rapid commissioning thanks to free and reliable drivers from our technology partners

Buy product

Technical Details

• High-inrush relay: max. 4 sec: 30 A /max. 20 ms: 80 A
• Measurement of key electrical parameters: current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
• Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
• Vertical mounting, 0 HU
• LxWxH: 69/77 x 7 x 6 cm (length excl./incl. rotatable mounting brackets)
• Weight: approx. 3.0 kg
• Length mains cable: 2 m
• Operating temperature: 0-50 °C
• Storage temperature: -20 – 70 °C
• Relative humidity: 0 – 95 % (non condensing)

Electrical Connections

• 1 power supply IEC C20 (max. 16 A, 230 V)
• 8 power ports safety socket type F (max. 16 A) for 8316-1
• 8 power ports IEC C13 (max. 10 A) for 8316-2
• 1 Ethernet connector RJ45 (10/100 Mbit/s)
• 1 serial interface RS232 (Sub-D, 9-pin)
• 2 connectors (RJ45) for plug-&-play sensors

Buy product

Order code

• 8316-1: 8x safety socket type F
• 8316-2: 8x IEC C13

Scope of delivery

• Expert Power Control 8316-1 / 8316-2
• Quick start guide

• Support for: HTTP/HTTPS (REST API) JSON, SNMP, Modbus TCP, Telnet, SSH und MQTT 3.1.1
• Overview of GUDE’s comprehensive API (Application Programming Interface)
• HTTP/HTTPS, E-Mail (SSL, SSH, STARTTLS)
• Configuration and control via Telnet and SSH
• NTP function can be activated
• Supports Syslog
• Supports RADIUS authentication
• SNMPv1, v2c, v3 (Get/Traps)
• TLS 1.1, 1.2, 1.3
• IPv6-ready

Locations

• Industrial environments: Production facilities, solar installations, manufacturing rooms, warehouses or test labs
• IT installations: distributed infrastructures, equipment rooms, KVM, network closets, server racks, 19″ cabinets, data centers or server rooms
• AV environments: Huddle rooms, conference rooms, theaters, cinemas, marine environments, smart home, meeting rooms, courtrooms, lecture halls in universities, LED walls or digital signage systems (DooH)

Buy product

Application

• Switching and control of servers and IT devices in the server room and data center
• Switching of network or media devices by media controls of well-known AV manufacturers (AMX, Atlona, Barco, Crestron, Extron, Neets, QSC, Utelogy)
• Remote reboot of PCs, servers, routers and switches
• Reduction of power consumption and thus lower CO2 emissions from standby devices

• Network monitoring with with integration in monitoring software (PRTG, Icinga, Nagios, Power IQ, Tivoli)
• Environment monitoring with plug-and-play sensors (temperature, humidity and air pressure)