1105-1: 1x safety socket type F (DE)

Key Features

• Event and schedule controlled switching
• Precise current metering of up to 9 electrical measuring units
• 2 connectors for plug-and-play sensors
• Simple and quick mounting due to integrated mounting straps
• NTP function can be activated
• Integrated overvoltage protection type 3

Switching function

• Each power port can be switched via HTTP(S), SNMP, ModbusTCP or command line interface via Telnet, SSH and MQTT
• Programmable on/off sequences for remote reboots (Remote Reboot)
• Power ports can be switched when preset sensor thresholds are exceeded
• Self-healing function thanks to 1-channel watchdog: Each power port can be assigned its own Watchdog (ICMP/TCP), which initiates an automatic restart if necessary
• Switching state and switch-on delay up to 9999 seconds (166 minutes) individually adjustable for each output port after power failure
• Current peaks due to increased inrush currents are automatically prevented by sequential switch-on with a latency of 1 second

Go to demo webserver      Go to product brief

Metering function

• Power consumption metering (kwH) with 2 energy counters: one counter counts consistently, the other counter is resettable
• Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
• 1 connector for combined plug-and-play sensors (temperature, humidity and air pressure) to prevent often occurring physical hazards like overheating and increased humidity or air pressure

Security

• Integrated type 3 overvoltage protection prevents damage to the device and connected loads
• Long-life High-Inrush Relays prevent welding of relay contacts during inrush current peaks
• Generation of status messages and alarms (e-mail, syslog, SNMP traps MQTT, SSH, Telnet)
• Encrypted e-mails (SSL, STARTTLS)
• Access protection by IP access control
• Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
• Password protected access
• Beeper for audible alarm when sensor limits are exceeded/deceeded

Operation

• Easy-to-read LED display for displaying total current, IP address and sensor values
• Firmware update via Ethernet during operation (no restart required)
• Simple and flexible configuration via web browser, Windows or Linux program
• Dynamic assignment of an IP address via DHCP or manual assignment of static IP address
• Rapid commissioning thanks to free and reliable drivers from our technology partners

Buy product

Technical Details

• Integrated type 3 overvoltage protection (L-N, L/N-PE), status retrievable via network
• High-inrush relay: max. 4 sec: 30 A /max. 20 ms: 80 A
• Measurement of key electrical parameters: current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
• Measurement of residual current type A (mA)
• Encrypted communication through SSL (TLS 1.1, 1.2, 1.3) and SSH
• LxWxH: 12 x 5.3 x 6.5 cm (without plug socket)
• Weight: approx. 0.3 kg
• Operating temperature: 0-50 °C
• Storage temperature: -20 – 70 °C
• Relative humidity: 0 – 95 % (non condensing)

Electrical Connections

• 1 power supply safety socket type F (max. 16 A, 230 V)
• 1 power port safety socket type F (max. 16 A)
• 1 Ethernet connector RJ45 (10/100 Mbit/s)
• 1 sensor connector (RJ45) für plug-and-play sensors

Buy product

Order code

• 1105-1: 1x safety socket type F (DE)

Scope of delivery

• Expert Power Control 1105-1
• Quick start guide

• Support for: HTTP/HTTPS (REST API) JSON, SNMP, Modbus TCP, Telnet, SSH und MQTT 3.1.1
• Overview of GUDE’s comprehensive API (Application Programming Interface)
• HTTP/HTTPS, E-Mail (SSL, SSH, STARTTLS)
• Configuration and control via Telnet and SSH
• NTP function can be activated
• Supports Syslog
• Supports RADIUS authentication
• SNMPv1, v2c, v3 (Get/Traps)
• TLS 1.1, 1.2, 1.3
• IPv6-ready

Locations

• Industrial environments: Production facilities, solar installations, manufacturing rooms, warehouses or test labs
• IT installations: distributed infrastructures, equipment rooms, KVM, network closets, server racks, 19″ cabinets, data centers or server rooms
• AV environments: Huddle rooms, conference rooms, theaters, cinemas, marine environments, smart home, meeting rooms, courtrooms, lecture halls in universities, LED walls or digital signage systems (DooH)

Buy product

Application

• Switching and control of servers and IT devices in the server room and data center
• Switching of network or media devices by media controls of well-known AV manufacturers (AMX, Atlona, Barco, Crestron, Extron, Neets, QSC, Utelogy)
• Remote reboot of PCs, servers, routers and switches
• Reduction of power consumption and thus lower CO2 emissions from standby devices

• Network monitoring with with integration in monitoring software (PRTG, Icinga, Nagios, Power IQ, Tivoli)
• Environment monitoring with plug-and-play sensors (temperature, humidity and air pressure)