Automatic Transfer Switch

Expert Transfer Switch 8801-1 for redundant power supply in IT and AV installations
  • Fewer and shorter failures of IT and AV installations
  • Automatic switchover to an alternative power supply
  • Detect AV and IT problems at an early stage: Proactive power and environment monitoring
  • Increased energy efficiency (Green IT and AV): Reduction of electricity costs and CO2 emissions
  • Integrate anywhere: Quickly and easily integrate anywhere with API interface: REST API, https, SNMP, Telnet and MQTT
Massive time and cost savings through plug-and-play drivers from our technology partners
Key Features
  • Redundant power supply in 19″ racks
  • Industry standard switching times
  • Power supply of up to 7 loads
  • Precise current metering of up to 9 units and fault current
  • 2 sensor connectors for plug-and-play sensors
  • Fast and easy installation thanks to mounting brackets
  • NTP function can be activated
Switching functions
  • Automatic switchover to alternative power supply in the event of failure of the primary power supply (A or B)
  • Switchover also in case of phase shift
  • On return of primary power supply (A or B), automatic switchback possible
  • Industry standard switching times
  • Typical switching times: 7-10 ms

Demo

Metering functions
  • Power consumption metering (kwH) with 2 energy counters: one counter counts consistently, the other counter is resettable
  • Metering of current (A), voltage (V), phase angle, power factor, frequency (Hz), active power (W), apparent power (VA) and reactive power (VAr)
  • 2 energy counters per output: one counter counts consistently, the other counter is resettable
  • Metering of differntial current type A (mA)
  • 2 connectors for combined plug-and-play sensors (temperature, humidity and air pressure)
Security
  • Generation of status messages (e-mail, syslog and SNMP traps)
  • Encrypted e-mails (SSL, STARTTLS)
  • Access protection by IP access control
  • Encrypted communication through SSH
  • Secure Login via SSL
  • Buzzer for audible alarm when sensor limits are exceeded/deceeded
Operation
  • LED display for information such as port status, current, sensor and power supply
  • Firmware update via Ethernet during operation (no restart required)
  • Simple and flexible configuration via web browser, Windows or Linux program
  • Dynamic assignment of an IP address via DHCP or manual assignment of static IP address
  • Convenient control on the go via free GUDE Control+ app (Android and iOS)
Buy product

Suitable accessories

Description

The Expert Transfer Switch 8801-1 is an Automaic Transfer Switch (ATS) for switching to an alternative power supply when needed. The short switching time to an alternative power supply protect the connected loads from down time – especially in case of phase shifts. An automatic switch-back to the restored power supply is also possible.

The Expert Transfer Switch 8801-1 has 2 IEC C20 connectors for power supply, 6 IEC C13 output ports (10 A) and 1 IEC C19 output port (16 A). Manual switching via the button, SNMP, Telnet or web interface allows maintenance work on one supply line.

Furthermore, the device has energy and residual current metering and offers a quick overview of the switching status and the measured values of the device through easy-to-read LED displays. Thanks to the two sensor connections, ambient temperature, humidity and air pressure can be monitored with optionally available sensors. The Expert Transfer Switch 8801-1 allows the generation of messages via e-mail, syslog and SNMP traps depending on set thresholds of energy, temperature, humidity or air pressure measurement.

 

Do you have questions about this product?